panasonic t05 06 free download

File name t05_06.pdf

INPUT Equipment Setting Alignment menu Procedure 1 625i Color Picture: 1) Find the nearest area to brightness of 10 cd/m 2 as Low Gray Scale Analyzer Normal Sub Adjust light by color sensor. Pattern White balance: Sub Bright 2) Adjust Sub bright to set Low light level to 10 cd/m2 Cool exactly. Aspect: PANEL W/B 16:9 G cut off 3) Set G cut off to " 80 ". PANEL W/B B cut off 4) Adjust B and R cut off to set color temperature as R cut off shown Fig.-05. High light 75% Sub Adjust Low light 15% Sub Bright 5) If Sub Bright is changed re-adjust it to set Low light to 10 cd/m2. 6)Find 75% of white area by color sensor. PANEL W/B G Drive 7) Set G Drive to " D8 ". PANEL W/B B Drive 8) Adjust B and R Drive to set color temperature R Drive as shown Fig.-05. 9) Repeat item 4) to 7) to set both Low light and high light. PANEL W/B R,G,B Drive 10) Increase same steps of R, G and B Drive to set R,G,B Drive largest level of 3 color drive to "FC". PANEL W/B R,G,B cut off 11) Re-adjust Low light level again. Color Temp. x y Cool(Hi) 0.272 0.290 Normal(Mid) 0.288 0.296 Warm(Low) 0.313 0.329